harman/kardon AVR-510 Specifications

Digital Surround Processor

Powers Center and Rear Surrounds

Audio Specifications:

  • Stereo Mode:
    • Continuous Average Power (FTC) Per Channel : 80 Watts per channel, 20Hz - 20kHz, @ <0.07% THD, both channels driven into 8 ohms
  • Five-Channel Surround Modes:
    • Power Per Individual Channel:
      • Front L & R Channels : 70 Watts per channel @ < 0.07% THD, 20Hz - 20kHz into 8 ohms
      • Center Channel : 70 Watts @ <0.07% THD, 20Hz - 20kHz into 8 ohms
      • Surround Channels : 70 Watts per channel @ <0.07% THD, 20Hz - 20kHz into 8 ohms
  • Input Sensitivity/Impedance Linear (High-Level) : 200mV/47k Ohms
  • Signal-to-Noise Ratio (IHF-A) : 95dB
  • Surround System Adjacent Channel Separation:
    • Analog Source Decoding : 40dB
    • Dolby« Digital : 55dB
    • DTS« : 55dB
  • Frequency Response at 1W (+0dB,?3dB) : 10Hz - 100kHz
  • High Instantaneous Current Capability (HCC) : ▒45 Amps
  • Transient Intermodulation Distortion (TIM) : Unmeasurable
  • Rise Time : 16 Ásec
  • Slew Rate : 40V/Ásec

FM Tuner:

  • Frequency Range : 87.5 - 108MHz
  • Usable Sensitivity : IHF 1.3 ÁV/13.2dBf
  • Signal-to-Noise Ratio (Mono/Stereo) : 70/68dB
  • Distortion (Mono/Stereo) : 0.2%/0.3%
  • Stereo Separation : 40dB @ 1kHz
  • Selectivity : ▒400kHz, 70dB
  • Image Rejection : 80dB
  • IF Rejection :90dB
  • Tuner Output Level : 1kHz, ▒75kHz Dev 500mV

AM Tuner:

  • Frequency Range :520 - 1710kHz
  • Signal-to-Noise Ratio :45dB
  • Usable Sensitivity :Loop 500ÁV
  • Distortion : 1kHz, 50% Mod 0.8%
  • Selectivity :▒10kHz, 30dB

Video:

  • Television Format : NTSC
  • Input Level/Impedance :1Vp-p/75 Ohms
  • Output Level/Impedance :1Vp-p/75 Ohms
  • Video Frequency Response :10Hz - 8MHz (-3dB)

General:

  • Power Requirement :AC 120V/60Hz
  • Power Consumption :78 Watts idle, 694 Watts maximum (2 channels driven)

Dimensions:

  • (H x W x D) : 6.5" x 17.3" x 17.1" (165mm x 440mm x 435mm)
  • Weight : 35 lb (15.9kg)
HK AVR 510 Review